Washing Machine Lavatrice - WNF 8543 AE20 WNF 8543 ACE20 Washing Machine Manuale utente
←
→
Trascrizione del contenuto della pagina
Se il tuo browser non visualizza correttamente la pagina, ti preghiamo di leggere il contenuto della pagina quaggiù
Washing Machine Lavatrice WNF 8543 AE20 WNF 8543 ACE20 Washing Machine Manuale utente
1 Important safety instructions • Never touch the plug with wet hands! Never
This section contains safety instructions that unplug by pulling on the cable, always pull
will help protect from risk of personal injury out by grabbing the plug.
or property damage. Failure to follow these • Use detergents, softeners and supplements
instructions shall void any warranty. suitable for automatic washing machines
only.
General safety • Follow the instructions on the textile tags
• This product should not be used by persons and on the detergent package.
with physical, sensory or mental disorders • The product must be unplugged during
or unlearned or inexperienced people installation, maintenance, cleaning and
(including children) unless they are attended repairing procedures.
by a person who will be responsible for their • Always have the installation and repairing
safety or who will instruct them accordingly procedures carried out by the Authorized
for use of the product. Service Agent. Manufacturer shall not be
• Never place the product on a carpet- held liable for damages that may arise from
covered floor; otherwise, lack of airflow procedures carried out by unauthorized
beneath the machine will cause electrical persons.
parts to overheat. This will cause problems
with your product. Intended use
• Do not operate the product if the power • This product has been designed for
cable / plug is damaged. Call the Authorized domestic use. It is not suitable for
Service Agent. commercial use and it must not be used out
• Have a qualified electrician connect a of its intended use.
16-Ampere fuse to the installation location of • The product must only be used for washing
the product. and rinsing of laundry that are marked
• If the product has a failure, it should not accordingly.
be operated unless it is repaired by the • The manufacturer waives any responsibility
Authorized Service Agent. There is the risk of arisen from incorrect usage or transportation.
electric shock! • The service life of your product is 10 years.
• This product is designed to resume During this period, original spare parts will be
operating in the event of powering on available to operate the appliance properly.
after a power interruption. If you wish to Safety instructions
cancel the programme, see "Cancelling the • Electrical products are dangerous for the
programme" section. children. Keep children away from the
• Connect the product to a grounded outlet product when it is in use. Do not let them
protected by a fuse complying with the to tamper with the product. Use child lock
values in the "Technical specifications" to prevent children from intervening with the
table. Do not neglect to have the grounding product.
installation made by a qualified electrician. • Do not forget to close the loading door
Our company shall not be liable for any when leaving the room where the product is
damages that will arise when the product is located.
used without grounding in accordance with • Store all detergents and additives in a safe
the local regulations. place away from the reach of the children.
• The water supply and draining hoses
must be securely fastened and remain
undamaged. Otherwise, there is the risk of
water leakage.
• Never open the loading door or remove the
filter while there is still water in the drum.
Otherwise, risk of flooding and injury from
hot water will occur.
• Do not force open the locked loading door.
The loading door will be ready to open just a
few minutes after the washing cycle comes
to an end. In case of forcing the loading door
to open, the door and the lock mechanism
may get damaged.
• Unplug the product when not in use.
• Never wash the product by spreading or
pouring water onto it! There is the risk of
electric shock!
2 - EN2 Installation 3. Attach the plastic covers supplied in the
Refer to the nearest Authorised Service Agent for User Manual bag into the holes on the rear
installation of the product. To make the product panel. (P)
ready for use, review the information in the
user manual and make sure that the electricity,
tap water supply and water drainage systems
are appropriate before calling the Authorized Keep the transportation safety bolts in a safe
Service Agent. If they are not, call a qualified C place to reuse when the washing machine
technician and plumber to have any necessary needs to be moved again in the future.
arrangements carried out. Never move the product without the
Preparation of the location and electrical, C
C tap water and waste water installations at
transportation safety bolts properly fixed in
place!
the place of installation is under customer's Connecting water supply
responsibility. The water supply pressure required to run
B Installation and electrical connections of C the product is between 1 to 10 bars (0.1
the product must be carried out by the – 10 MPa). It is necessary to have 10 – 80
Authorized Service Agent. Manufacturer shall liters of water flowing from the fully open
not be held liable for damages that may arise tap in one minute to have your machine run
from procedures carried out by unauthorized smoothly. Attach a pressure reducing valve if
persons. water pressure is higher.
A Prior to installation, visually check if the
product has any defects on it. If so, do not C If you are going to use the double water-inlet
product as a single (cold) water-inlet unit,
have it installed. Damaged products cause you must install the supplied stopper to the
risks for your safety. hot water valve before operating the product.
Make sure that the water inlet and discharge
C hoses (Applies for the products supplied with a
as well as the power cable are not blind stopper group.)
folded, pinched or crushed while pushing If you want to use both water inlets of the
the product into its place after installation or C product, connect the hot water hose after
cleaning procedures. removing the stopper and gasket group from
Appropriate installation location the hot water valve. (Applies for the products
• Place the machine on a rigid floor. Do not supplied with a blind stopper group.)
place it on a long pile rug or similar surfaces. Models with a single water inlet should not
• Total weight of the washing machine and the A be connected to the hot water tap. In such
dryer -with full load- when they are placed a case the laundry will get damaged or the
on top of each other reaches to approx. product will switch to protection mode and
180 kilograms. Place the product on a solid will not operate.
and flat floor that has sufficient load carrying Do not use old or used water inlet hoses
capacity! A on the new product. It may cause stains on
• Do not place the product on the power your laundry.
cable. 1. Connect the special hoses supplied with the
• Do not install the product at places where product to the water inlets on the product.
temperature may fall below 0ºC. Red hose (left) (max. 90 ºC) is for hot water
• Place the product at least 1 cm away from inlet, blue hose (right) (max. 25 ºC) is for cold
the edges of other furniture. water inlet.
Removing packaging reinforcement
Tilt the machine backwards to remove the
packaging reinforcement. Remove the packaging
reinforcement by pulling the ribbon.
Removing the transportation locks
A Do not remove the transportation
locks before taking out the packaging
reinforcement.
A Remove the transportation safety bolts
before operating the washing machine,
otherwise, the product will be damaged.
1. Loosen all the bolts with a spanner until they A Ensure that the cold and hot water
rotate freely (C). connections are made correctly when
2. Remove transportation safety bolts by installing the product. Otherwise, your
turning them gently. laundry will come out hot at the end of the
3 - ENwashing process and wear out. • If the length of the hose is too short, use it
2. Tighten all hose nuts by hand. Never use a by adding an original extension hose. Length
wrench when tightening the nuts. of the hose may not be longer than 3.2 m.
To avoid water leak failures, the connection
between the extension hose and the drain
hose of the product must be fitted well with
an appropriate clamp as not to come off and
leak.
Adjusting the feet
A In order to ensure that the product operates
more silent and vibration-free, it must stand
3. Open the taps completely after making level and balanced on its feet. Balance the
the hose connection to check for water machine by adjusting the feet. Otherwise,
leaks at the connection points. If any leaks the product may move from its place and
occur, turn off the tap and remove the nut. cause crushing and vibration problems.
Retighten the nut carefully after checking
the seal. To prevent water leakages and
damages caused by them, keep the taps
closed when the machine is not in use.
Connecting to the drain
• The end of the drain hose must be directly
connected to the wastewater drain or to the
washbasin.
A Your house will be flooded if the hose comes
out of its housing during water discharge.
Moreover, there is risk of scalding due to
high washing temperatures! To prevent such
situations and to ensure smooth water intake
and discharge of the machine, fix the end of
the discharge hose tightly so that it cannot
come out.
• The hose should be attached to a height of
at least 40 cm, and 100 cm at most.
• In case the hose is elevated after laying it
on the floor level or close to the ground 1. Loosen the lock nuts on the feet by hand.
(less than 40 cm above the ground), water 2. Adjust the feet until the product stands level
discharge becomes more difficult and the and balanced.
laundry may come out excessively wet. 3. Tighten all lock nuts again by hand.
Therefore, follow the heights described in the
figure.
A Do not use any tools to loosen the lock nuts.
Otherwise, they will get damaged.
Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the values in
the "Technical specifications" table. Our company
• To prevent flowing of dirty water back into shall not be liable for any damages that will arise
the machine and to allow for easy discharge, when the product is used without grounding in
do not immerse the hose end into the dirty accordance with the local regulations.
water or drive it in the drain more than 15 • Connection must comply with national
cm. If it is too long, cut it short. regulations.
• The end of the hose should not be bent, • Power cable plug must be within easy reach
it should not be stepped on and the hose after installation.
must not be pinched between the drain and • The voltage and allowed fuse or breaker
the machine. protection are specified in the “Technical
specifications” section. If the current value of
4 - ENthe fuse or breaker in the house is less than of removal procedure; see, "Removing the
16 Amps, have a qualified electrician install transportation locks".
a 16 Amp fuse. Never move the product without the
C transportation
• The specified voltage must be equal to safety bolts properly fixed in
your mains voltage. place!
• Do not make connections via extension Disposing of the old product
cables or multi-plugs. Dispose of the old product in an
B Damaged power cables must be replaced environmentally friendly manner.
by the Authorized Service Agents. Refer to your local dealer or solid waste
First use collection centre in your area to learn how to
Before starting to use the product, make sure dispose of your product.
that all preparations are made in accordance For children's safety, cut the power cable and
with the instructions in sections "Important break the locking mechanism of the loading
safety instructions" and "Installation". door so that it will be nonfunctional before
To prepare the product for washing laundry, disposing of the product.
perform first operation in Drum Cleaning
programme. If your machine is not featured with 3 Preparation
Drum Cleaning programme, use Cottons-90 Things to be done for energy saving
programme and select Additional Water or Following information will help you use the
Extra Rinse auxiliary functions as well. Before product in an ecological and energy-efficient
starting the programme, put max. 100 g of manner.
powder anti-limescale into the main wash • Operate the product in the highest
detergent compartment (compartment nr. II). If capacity allowed by the programme you
the anti-limescale is in tablet form, put only one have selected, but do not overload; see,
tablet into compartment nr. II. Dry the inside of "Programme and consumption table".
the bellow with a clean piece of cloth after the • Always follow the instructions on the
programme has come to an end. detergent packaging.
• Wash slightly soiled laundry at low
temperatures.
• Use faster programmes for small quantities
of lightly soiled laundry.
• Do not use prewash and high temperatures
for laundry that is not heavily soiled or
stained.
• If you plan to dry your laundry in a
dryer, select the highest spin speed
recommended during washing process.
C Use an anti-limescale suitable for the • Do not use detergent in excess of the
washing machines. amount recommended on the detergent
C Some water might have remained in package.
the product due to the quality control
processes in the production. It is not Sorting the laundry
harmful for the product. • Sort laundry according to type of fabric,
Disposing of packaging material colour, and degree of soiling and allowable
water temperature.
Packaging materials are dangerous to children. • Always obey the instructions given on the
Keep packaging materials in a safe place away garment tags.
from reach of the children.
Packaging materials of the product are Preparing laundry for washing
manufactured from recyclable materials. • Laundry items with metal attachments
Dispose of them properly and sort in such as, underwired bras, belt buckles or
accordance with recycled waste instructions. metal buttons will damage the machine.
Do not dispose of them with normal domestic Remove the metal pieces or wash the
waste. clothes by putting them in a laundry bag or
Transportation of the product pillow case.
• Take out all substances in the pockets
Unplug the product before transporting such as coins, pens and paper clips, and
it. Remove water drain and water supply turn pockets inside out and brush. Such
connections. Drain the remaining water in the objects may damage the product or cause
product completely; see, "Draining remaining noise problem.
water and cleaning the pump filter". Install • Put small size clothes such as infant's
transportation safety bolts in the reverse order socks and nylon stockings in a laundry bag
5 - ENor pillow case. - (I) for prewash
• Place curtains in without compressing - (II) for main wash
them. Remove curtain attachment items. – (III) for softener
• Fasten zippers, sew loose buttons and – (*) in addition, there is siphon piece in the
mend rips and tears. softener compartment.
• Wash “machine washable” or “hand
washable” labeled products only with an 2 3 1 3 2 1
appropriate programme.
• Do not wash colours and whites together.
New, dark coloured cottons release a lot of
dye. Wash them separately.
• Tough stains must be treated properly
before washing. If unsure, check with a dry
cleaner. C The detergent dispenser may be in two
• Use only dyes/colour changers and different types according to the model of
limescale removers suitable for machine your machine as seen above.
wash. Always follow the instructions on the Detergent, softener and other cleaning
package. agents
• Wash trousers and delicate laundry turned • Add detergent and softener before starting
inside out. the washing programme.
• Keep laundry items made of Angora • Never open the detergent drawer while the
wool in the freezer for a few hours before washing programme is running!
washing. This will reduce pilling. • When using a programme without
• Laundry that are subjected to materials prewash, do not put any detergent into the
such as flour, lime dust, milk powder, etc. prewash compartment (compartment nr. I).
intensely must be shaken off before placing • In a programme with prewash, do not
into the machine. Such dusts and powders put liquid detergent into the prewash
on the laundry may build up on the inner compartment (compartment nr. I).
parts of the machine in time and can cause • Do not select a programme with prewash
damage. if you are using a detergent bag or
Correct load capacity dispensing ball. Place the detergent bag
The maximum load capacity depends on the or the dispensing ball directly among the
type of laundry, the degree of soiling and the laundry in the machine.
washing programme desired. • If you are using liquid detergent, do
The machine automatically adjusts the amount not forget to place the liquid detergent
of water according to the weight of the loaded cup into the main wash compartment
laundry. (compartment nr. II).
A Follow the information in the “Programme Choosing the detergent type
and consumption table”. When overloaded, The type of detergent to be used depends on
machine's washing performance will drop. the type and colour of the fabric.
Moreover, noise and vibration problems • Use different detergents for coloured and
may occur. white laundry.
Loading the laundry • Wash your delicate clothes only with
• Open the loading door. special detergents (liquid detergent, wool
• Place laundry items loosely into the shampoo, etc.) used solely for delicate
machine. clothes.
• Push the loading door to close until you • When washing dark coloured clothes and
hear a locking sound. Ensure that no items quilts, it is recommended to use liquid
are caught in the door. detergent.
The loading door is locked while a • Wash woolens with special detergent
C programme is running. The door can only made specifically for woolens.
be opened a while after the programme A Use only detergents manufactured
specifically for washing machines.
comes to an end.
In case of misplacing the laundry, noise A Do not use soap powder.
A and vibration problems may occur in the Adjusting detergent amount
machine. The amount of washing detergent to be used
depends on the amount of laundry, the degree
Using detergent and softener of soiling and water hardness. Read the
Detergent Drawer manufacturer's instructions on the detergent
The detergent drawer is composed of three package carefully and follow the dosage values.
compartments:
6 - EN• Do not use amounts exceeding the dosage contains a liquid detergent cup, fill the
quantities recommended on the detergent detergent into this cup before starting the
package to avoid problems of excessive programme.
foam, poor rinsing, financial savings and • If the gel detergent thickness is not fluidal
finally, environmental protection. or in the shape of capsule liquid tablet, put
• Use lesser detergent for small amounts or it directly into the drum before washing.
lightly soiled clothes. • Put tablet detergents into the main wash
• Use concentrated detergents in the compartment (compartment nr. II) or
recommended dosage. directly into the drum before washing.
Using softeners Tablet detergents may leave residues in the
C detergent
Pour the softener into the softener compartment. If you encounter
compartment of the detergent drawer. such a case, place the tablet detergent
• Use the dosages recommended on the between the laundry, close to the lower
package. part of the drum in future washings.
• Do not exceed the (>maxTips for efficient washing
Clothes
Light colours and Delicates/
Colors Dark colors
whites Woolens/Silks
(Recommended (Recommended (Recommended
(Recommended
temperature range temperature range temperature range
temperature range based
based on soiling level: based on soiling based on soiling
on soiling level: cold-40C)
40-90C) level: cold-40C) level: cold-30C)
It may be necessary
to pre-treat the Powder and
stains of perform liquid detergents
prewash. Powder recommended for Prefer liquid
and liquid detergents Liquid detergents
colours can be used at detergents
Heavily Soiled recommended dosages recommended suitable for produced for
for whites can be colours and dark
for heavily soiled clothes. delicate clothes.
(difficult stains used at dosages It is recommended to use colours can be Woollen and silk
such as grass, recommended for powder detergents to used at dosages clothes must
coffee, fruits and heavily soiled clothes. clean clay and soil stains recommended be washed with
blood.) It is recommended to for heavily soiled
and the stains that are special woollen
use powder detergents clothes.
sensitive to bleaches. detergents.
to clean clay and soil Use detergents without
stains and the stains bleach.
that are sensitive to
bleaches.
Soiling Level
Prefer liquid
Powder and Powder and Liquid detergents detergents
Normally Soiled liquid detergents liquid detergents suitable for produced for
recommended for recommended for colours and dark delicate clothes.
(For example, whites can be used at colours can be used at colours can be Woollen and silk
stains caused by dosages recommended dosages recommended used at dosages clothes must
body on collars for normally soiled for normally soiled recommended be washed with
and cuffs) clothes. clothes. Use detergents for normally soiled special woollen
without bleach. clothes. detergents.
Prefer liquid
Powder and Liquid detergents detergents
Powder and liquid detergents suitable for produced for
Lightly Soiled liquid detergents recommended for colours and dark delicate clothes.
recommended for colours can be used at colours can be Woollen and silk
(No visible stains whites can be used at dosages recommended used at dosages clothes must
exist.) dosages recommended for lightly soiled clothes. recommended be washed with
for lightly soiled clothes. Use detergents without for lightly soiled special woollen
bleach. clothes. detergents.
8 - EN4 Operating the product
Control panel
1 2 3 4
9
8
7 6 5
5- Delayed Start buttons (Direction buttons)
1- Programme Selection button 6- Additional Function buttons
2- Display 7- Soiling Level Selection button
3- Start / Pause button 8- Spin Speed Adjustment button
4- On / Off button 9- Temperature Adjustment button
5. Place the laundry in the machine.
Display symbols 6. Add detergent and fabric softener.
7. Press On / Off button.
a m l k Programme selection
Select the programme suitable for the type,
quantity and soiling degree of the laundry
b c
o in accordance with the "Programme and
c consumption table" and the temperature table
d below.
ef g h ı i j Heavily soiled white cottons
a- Information line and linens. (coffee table covers,
90˚C
b- Temperature indicator tableclothes, towels, bed sheets,
c- Temperature symbol etc.)
d- Spin Speed indicator Normally soiled, coloured, fade
e- Spin symbol proof cottons or synthetic clothes
f- Child Lock symbol 60˚C (shirt, nightgown, pajamas, etc.)
g- Soiling Level symbol and lightly soiled white linens
h- Additional Function symbols (Prewash / (underwear, etc.)
Extra Rinse / Anti-Crease)
ı - Programme symbols (Prewash / Main Wash 40˚C- Blended laundry including
/ Rinse / Softener / Spin / End) 30˚C- delicate textile (veil curtains, etc.),
i - Remaining Time and Delayed Start Time Cold synthetics and woolens.
indicator
j - Delayed Start symbol "< smarTwash 1/18>" will appear on the display
k - Pause symbol first. Select the desired programme by pressing
l - Start symbol the Programme button.
m - Door Open symbol C withYou can also scroll through the programmes
Direction buttons (at the same time
Preparing the machine "Delayed Start") below the screen.
1. Make sure that the hoses are connected
tightly.
2. Make sure that the discharge hose is
connected.
3. Plug in your machine.
4. Turn the tap on completely.
9 - ENsmarTwash programme.
C smarTwash is a programme without prewash
step.
88 c o
A Do not wash your woolen and delicate
1888 18:88 clothes in smarTwash programme.
Select “Lightly Soiled” degree for clothes that
A may bleed.
You may wash your normally soiled durable
cotton and linen laundry in this programme with
C Programmes are limited with the highest spin the highest energy and water saving compared
speed appropriate for that particular type of to all other wash programmes suitable for
fabric. cottons. Actual water temperature may differ
C When selecting a programme, always from the declared cycle temperature. Programme
consider the type of fabric, colour, degree of duration may automatically be shortened during
soiling and permissible water temperature. later stages of the programme if you wash less
C Always select the lowest required amount (e.g. ½ capacity or less) of laundry. In
temperature. Higher temperature means this case energy and water consumption will be
higher power consumption. further decreased giving you the opportunity for a
C For further programme details, see more economical wash. This feature is available
"Programme and consumption table". for certain models having remaining time display.
Main programmes As the washing temperature is automatically
Depending on the type of fabric, use the adjusted in smarTwash programme according to
following main programmes. the soiling level, be sure that the soiling level you
• Wool have selected corresponds to a temperature level
Use this programme to wash your woolen which does not exceed the maximum allowable
clothes. Select the appropriate temperature temperature given on the garment's washing
complying with the tags of your clothes. Use tag. If the temperature read on the temperature
appropriate detergents for woolens. display does not conform to the garment's
• smarTwash Programme washing instructions, change the soiling level so
Use this programme to wash your frequently that the temperature is in line with the washing
washable cotton, synthetic or blended instruction for the garment.
(cotton+synthetic) clothes. Programme The maximum washing temperature in
detects the type and quantity of the laundry smarTwash programme subject to the
to automatically adjust water consumption, soiling level and laundry type is0ºC. Washing
programme time and spin speed. You can performance may not be at the desired level for
change the programme time by selecting the heavily soiled whites and stubborn stains (collar,
soiling level according to the degree of soiling. sock soil, perspiration stain, etc.). In this case, it
Spin speed, temperature and additional
C function is recommended to select Hygiene programme
selection cannot be made in with prewash and set the temperature to 50-
60°C.
10 - ENMany clothes are correctly detected and safely washed in smarTwash programme. These clothes
and the appropriate smarTwash settings for washing them are shown in the table below.
Max. laundry
Type of laundry Laundry content smarTwash soiling levels
amount
Home textiles (duvet, bed sheet,
pillowcase, coverlet, towel, bathrobe, Heavily soiled - moderately
Cotton, lycra Full capacity
table cloth, hand cloth, napkin, couch soiled - lightly soiled
cover, beach towel, etc.).
Underwears (undershirts, panties/ Heavily soiled - moderately
Cotton, lycra Full capacity
slips, boxers, etc.), socks, pajamas soiled - lightly soiled
Heavily soiled - moderately
Shirts Cotton, polyester, linen 1/2 capacity
soiled - lightly soiled
Knitted garments* (T-shirt, body, Cotton, polyamide (nylon), Moderately soiled - lightly
1/2 capacity
dress, lingerie, tights) polyester, lycra soiled - refresh
Sportswear (Sweatshirt, track suit, Cotton, polyamide (nylon), Moderately soiled - lightly
1/2 capacity
shorts, etc.) polyester, microfiber, lycra soiled - refresh
Moderately soiled - lightly
Jeans (trousers, jackets, vests, etc.) Cotton, lycra 1/2 capacity
soiled - refresh
Corduroy and canvas clothes Moderately soiled - lightly
Cotton, lycra 1/2 capacity
(trousers, shirts, etc.) soiled - refresh
Cotton, polyester, polyamide
Dark coloured clothes Lightly soiled - refresh 1/2 capacity
(Nylon)
"Knitted clothes can easily shrink or stretch, crooked or pilled due to their elastic fabrics. Deformations on
knitted fabrics are related with the quality of the cloth, and do not arise from washing programmes (smarTwash
or other washing programmes). Use Sportswear washing programme for knitted clothes.
Washing recommendations for laundries • Printed clothes with large borders in
to be washed carefully in smarTwash different colours:
programme Turn the cloth inside out and select
As the operation principle of smarTwash Lightly Soiled or Refresh soiling level in
programme is subject to the soiling level, accordance with the temperature level
clothes that may be affected by high given in washing instructions of the
temperature and washing options for them are garment.
indicated below. • Linen clothes (trousers, shirts, etc.):
• Dark coloured clothes (black jeans, It is recommended to select Moderately
black corduroys, etc.) : Soiled or a lower soiling level in accordance
Do not wash delicate dark coloured with the temperature level given in washing
clothes in smarTwash programme. When instructions of the garment.
washing dark coloured clothes that are not Linen clothes may crease too much due to
delicate in smarTwash programme, load their textures. You can wash such clothes
little amount of laundry and select "Lightly in Shirts programme as well.
Soiled" or "Refresh" options. Along with smarTwash programme, your
You can wash such clothes in Dark Wash washing machine is equipped with many other
programme as well. special washing programmes for cloth types to
• Outdoor clothes (water and windproof be washed gently with care (Bedding, Lingerie,
clothes, climacool, drifit, etc.) Wool, Curtain, etc.).
Select Moderately Soiled, Lightly Soiled
or Refresh soiling level in accordance with
the temperature level given in washing
instructions of the garment.
You can wash such clothes in Sportswear
programme as well.
• Clothes in Live / brigh/ blended /
contrast colours:
Select Lightly Soiled or Refresh soiling
level in accordance with the temperature
level given in washing instructions of the
garment.
11 - ENFollowing table includes cloth types to be washed gently and some washing programmes suitable
for some special clothes.
Recommended washing
Special laundry type Laundry content
programme
Viscose, modal, rayon, tencel,
Blouse, dress, skirt, foulard Hand wash
lyocell, angora
Knitted, dress Wool, acrylic Wool
Pullover, cardigan, vest, scarf, beret, socks,
Wool, acrylic, cashmere Wool
etc.
Blouse, dress, scarf, foulard Silk, cashmere Lingerie
Sateen lingerie clothes, laces, bras Silk, polyester, polyamide Lingerie
Fabric trouser, skirt, dress Polyester Hand wash
Featured sportswear (water and windproof
Polyester, polyamide Sportswear
clothes)
Tulle curtain Polyester, polyamide Curtain
Fiber duvet Fiber Bedding
Heavily soiled clothes (aprons, children's Hygiene + Prewash (with
Cotton, polyester
wear) high temperature selection)
Baby dresses Cotton Hygiene
• Hygiene Soiling level and temperature can be
Use this programme to wash baby laundry, and C selected separately in this programme.
the laundry that belongs to allergic persons. • Jeans
Longer heating time and an additional rinsing Use this programme to wash clothes such as
step provide a higher level of hygiene. trousers, jackets, vests, etc., made of denim.
• Hand Wash Lower mechanical movement in washing cycles
Use this programme to wash your woolen/ and lower rpm in spinning cycles are used to
delicate clothes that bear “not machine- prevent washing damages on stoned jeans as
washable” tags and for which hand wash well as to ensure a longer life.
is recommended. It washes laundry with a Soiling level and temperature can be
very gentle washing action to not to damage C selected separately in this programme.
clothes. • Sportswear
• Mini Use this programme to wash your garments
Use this programme to wash your lightly soiled that are worn for a short time such as
cotton clothes in a short time. You can set sportswear. It is suitable to wash little amount of
temperature up to 90 ˚C. cotton / synthetic blended garments.
• Mini 14 • Curtain
Use this programme to wash your little amount Use this programme to wash your tulles and
of lightly soiled cotton clothes in a short time. curtains. Thanks to the special spin profile of
Your clothes will be washed at 30 ˚C in a short the programme, tulles and curtains crease
time like 14 minutes. lesser.
• Dark wash As their meshed texture causes excessive
Use this programme to wash your dark C foaming, wash the veils/tulle by putting little
coloured laundry or the laundry that you do not amount of detergent into the main wash
want it get faded. Washing is performed with compartment. Do not put detergent in the
little mechanic action and at low temperatures. prewash compartment.
It is recommended to use liquid detergent or It is recommended to use special
woolen shampoo for dark coloured laundry. C detergents produced for curtains in this
• Shirts programme.
Use this programme to wash the shirts made of • Bedding
cotton, synthetic and synthetic blended fabrics Use this programme to wash your fiber duvets
together. that bear "machine washable" tag.
12 - ENNormally soiled, white cottons and
C Do not load more than 1 double fibre duvet.
Do not wash your duvets, pillows and etc. 90˚C linens. (Eg.: coffee table covers,
C that contain cotton in the machine. tableclothes, towels, bed sheets)
A Do not wash the items apart from duvets
such as carpets, rugs and etc. in the
Normally soiled colour-fast linens,
cottons or synthetic clothes (Eg.:
60˚C
machine. They cause permanent damage in shirts, lingerie, pajamas) and lightly
soiled white linens (Eg.: underwears)
your machine.
• Lingerie 40˚C Blended laundry including delicate
Use this programme to wash delicates such as 30˚C Cold textile, synthetics and woolens.
underwears. If there is little amount of laundry,
use a laundry net. C Temperature cannot be selected in
Enclasp and button the clothes, and zip up. smarTwash programme. Temperature level
C Washing is made at low temperatures and is automatically determined by the machine
with less mechanical movements. in accordance with the soiling level you have
Better rinsing results are obtained thanks to selected. Heavily Soiled level indicates the
C the additional rinsing. maximum temperature level allowed for the
• Refresh selected programme. Refresh shows the
Use this programme to remove the odour on the lowest temperature level.
laundry that are worn only for once and do not Spin speed selection
contain any stains or dirt. Whenever a new programme is selected, the
• Night mode spin speed recommended for that programme
Use this programme to wash the cottons with appears on the Spin Speed indicator.
lesser energy consumption and silently. Spin To change the spin speed, press the Spin Speed
steps are cancelled for a silent washing and Adjustment button. Spin speed decreases
the cycle ends with the Rinse Hold step. After gradually. Then, the symbols for "No Spin" (---)
completion of the programme, Spin cycle should and "Rinse Hold" (I__I) functions appear on the
be run to spin the laundry. display.
Special programmes
For specific applications, select any of the
following programmes. 60c o
• Rinse
Use this programme when you want to rinse or 02:16
starch separately. If you are not going to unload your clothes
• Spin immediately after the programme completes,
Use this program to apply an additional spin at you can use Rinse Hold (I__I) function to keep
the desired speed for your laundry. your laundry in the final rinsing water in order to
A Select
type.
a spin speed suitable for the laundry prevent them from getting wrinkled when there is
no water in the machine.
• Pump If (I__I) symbol is displayed, machine is in Rinse
Use this programme to drain the water in the Hold mode.
machine. If you want to spin the laundry held in water,
Temperature selection adjust the spin speed and press Start / Pause
Whenever a new programme is selected, the button. The programme resumes. Water is
temperature recommended for that programme drained, laundry is spun and the programme is
appears on the temperature indicator. completed.
To change the temperature, press the If you want to drain the water at the end of
Temperature button. Temperature decreases the programme without spinning, use No Spin
with increments of 10 and finally, “-” symbol function.
indicating the cold wash option appears on the Soiling level selection
display. When you press the temperature button Whenever a new programme is selected, the
again, the temperature recommended for the soiling level recommended for that programme
programme is displayed. appears on the Soiling Level indicator.
Soiling level can be selected in smarTwash,
Jeans and Shirt programmes only. Just press
-- c
o
the Soiling Level Selection button to change
1000 00:17 the soiling level in programmes allowing this
selection.
Select appropriate soiling level before starting the
programme. Symbol of the selected soiling level
appears on the display.
13 - ENlevel is changed, programme times change
as well.
Soiling levels
There are four different soiling levels: Refresh,
Lightly Soiled, Normally Soiled, and Heavily
Soiled.
Refresh
This programme is used to remove the odour on
the laundry that are worn only for once and do
not have any stains or dirt.
Lightly Soiled
It is used for lightly soiled casual clothes with no
visible stains on them.
Normally Soiled
It is used for normally soiled daily clothes.
Heavily Soiled
It is used for heavily soiled clothes.
Washing properties change too in
C accordance with the selected soiling level.
For example, while the program time is
shortened and washing temperature drops
when Refresh or Lightly Soiled is selected,
the program time extends when Heavily
Soiled is selected.
C yourSelect Lightly Soiled degree especially for
clothes that may bleed.
C be In programmes where soiling level cannot
changed, Soiling Level automatically
changes when the temperature is changed.
Paying attention to the maximum allowable
temperature on the garment tag, select
a higher temperature for your heavily
soiled clothes, and a lower temperature
for the lightly soiled ones. Recommended
temperatures for the programmes and
the soiling levels corresponding to these
temperatures are shown in the "Programme
and consumption table".
Soiling level and temperature can be
C selected separately in Jeans and Shirt
programmes. Temperature value and the
corresponding specified soiling level are
displayed when these programmes are
selected. Soiling level automatically changes
when temperature is changed. When soiling
14 - ENProgramme and consumption table
EN 2 Auxiliary functions
Energy Consumption (kWh)
Water Consumption (l)
Soiling level selection
Selectable
Programme (°C) temperature
Max. Load (kg)
Max. Speed***
range °C
Extra rinse
Rinse hold
Easy iron
Prewash
smarTwash/Cotton60** - 8 54 1.08 * • -
smarTwash/Cotton60** - 4 43 0.96 * • -
smarTwash/Cotton40** - 4 47 0.77 * • -
smarTwash/Synthetic40 - 4 45 0.68 * • -
smarTwash/Cotton40-mini - 4 45 0.60 * • -
Bedding 40 - 55 0.65 800 • Cold-60
Mini 90 90 8 55 2.50 1400 • • Cold-90
Mini 60 60 8 55 1.05 1400 • • Cold-90
Mini 30 30 8 65 0.25 1400 • • Cold-90
Wool 40 2 50 0.30 800 • • Cold-40
Hand wash 30 1.5 35 0.20 600 Cold-30
Dark wash 40 4 65 0.65 800 • • Cold-40
Hygiene 90 8 90 2.70 1600 • * • 30 - 90
Sportswear 40 4 65 0.65 800 • • • • Cold-40
Shirts 40 4 65 0.70 600 • * • • Cold-60
Curtain 40 2 90 0.55 600 * * * • Cold-40
Mini 14 30 2 40 0.15 1400 • • Cold-30
Lingerie 30 1 45 0.15 600 • • Cold-30
Night mode 40 8 55 0.75 - • * * Cold-40
Refresh - 2 25 0.03 1600 -
Jeans 40 4 65 0.65 1000 • • • • • Cold-40
•: Selectable
*: Automatically selected, no canceling.
** : Energy Label programme (EN 60456 Ed.3)
*** :
If maximum spin speed of the machine is lower then this value, you can only select up to the
maximum spin speed.
- : See the programme description for maximum load.
15 - ENThe auxiliary functions in the table can vary • Easy iron
C according to the model of your machine. This function creases the clothes lesser when
Water and power consumption can vary they are being washed. Drum movement is
C subject to the changes in water pressure, reduced and spin speed is limited to prevent
water hardness and temperature, ambient creasing. In addition, washing is done with a
temperature, type and amount of laundry, higher water level.
selection of auxiliary functions and spin Use this function for delicate laundry that
C creases
speed, and changes in electric voltage. easily.
You can see the washing time of the When you select this function, load
C your
C programme you have selected on the machine with half of the maximum
display of the machine. In smarTwash laundry specified in the "Programme and
programme, spin speed, temperature and consumption table".
programme time are displayed 15 minutes When you select a programme that
C automatically
after the programme starts. It is normal selects this function, load
that small differences may occur between your machine with half of the maximum
the time shown on the display and the real laundry specified in the "Programme and
washing time. consumption table".
Additional function selection C inThis function is automatically selected
Curtains programme and cannot be
cancelled.
Time display
88 co
Remaining time to complete the programme
1888 18:88 appears on the display while the programme is
running. Time is displayed as “01:30” in hours
and minutes format.
Press Additional Function button to enter the 60 co
01:30
Additional Function menu. Using the Direction
(Delayed Start) buttons, select the additional
function you want to add to the programme,
600
then press Confirm button. Symbol of the Delayed Start
selected additional function appears on the With the Delayed Start function the startup
display. Press Start / Pause button to start the of the programme can be delayed up to 18
programme. hours. Delayed Start time can be increased by
To go back to the main menu (programme
C selection 30-minute increments.
screen), just press the Additional Do not use liquid detergents when you set
C Delayed
Function button again. Start! There is the risk of staining
Symbols of the additional functions
C compatible of the clothes.
with the selected programme
are displayed. If you attempt to select
an incompatible function, "No Function"
warning is displayed. For programmes 88 c
o
and compatible additional functions, see 1888 18:88
"Programme and consumption table".
• Prewash
• A Prewash is only worthwhile for heavily
soiled laundry. Not using the Prewash will Open loading door, place the laundry and add
save energy, water, detergent and time. detergent, etc. Select the washing programme,
• Prewash programme is automatically temperature, spin speed and, if required,
selected for tulles and curtains and cannot the auxiliary functions. Press and hold Left
be cancelled. Prewash without detergent and Right Arrow (Delayed Start) buttons for
is recommended for tulle and curtain 3 seconds simultaneously. Machine gives a
programmes. warning as "Time delay 3...2...1...". Select the
• Extra rinse desired time delay by pressing the direction
This function enables the machine to make arrows. Press Confirm button to Save the
another rinsing in addition to the one already time. Press Start / Pause button. Delayed Start
made after the main wash. Thus, the risk for countdown starts. Start symbol appears.
sensitive skins (babies, allergic skins, etc.) to be Delayed Start symbol at the right of the
effected by the minimal detergent remnants on C displayed delay time starts flashing. Time of
the laundry can be reduced.
16 - ENthe selected programme is also displayed For detailed information about activating the
every 15 seconds. function automatically, see "Machine Settings".
C theAdditional laundry can be loaded during
delayed start period.
At the end of the countdown, Delayed Start
C symbol 60 c
o
01:30
disappears, washing cycle starts
and the time of the selected programme
appears on the display.
600
Changing the delayed start period "Child lock" will appear on the display when any
If you want to change the time during button is pressed while the Child Lock is active.
countdown: To deactivate the Child Lock, press and hold
Press Start / Pause button. Pause symbol Additional Function and Confirm buttons at the
appears. Delayed Start symbol goes on same time.
flashing. Start symbol appears. Set the desired Machine displays a warning as "Unlock
time delay by pressing the direction arrows and 3...2...1..." and the lock is deactivated. For
then press Confirm. Press Start / Pause button. more detailed information, see "Machine
Delayed Start symbol flashes. Pause symbol Settings".
disappears. Start symbol flashes. Delayed Start When you press On / Off button while the Child
symbol at the right of the displayed delay time Lock is enabled, programme and the Child
starts flashing. Lock are cancelled. You need to deactivate the
Child Lock to stop the machine.
88 co
60 c o
1888 18:88 600 01:30
Canceling the Delayed Start function Progress of programme
If you want to cancel the delayed start Progress of a running programme is indicated
countdown and start the programme on the display by means of a set of symbols.
immediately: • Relevant symbol lights up in every program
Press and hold Left and Right Arrow (Delayed step. When the programme passes to a
Start) buttons for 3 seconds simultaneously. new step, symbol of the completed step
Machine gives a warning as "Time delay disappears and the symbol of the new step
3...2...1...". Press Start / Pause button. Start lights up. When the programme comes to
symbol flashes. Pause symbol appears. an end, the rightmost symbol remains lit
Press Delayed Start "" buttons until and "End" appears on the display.
"00:00" appears on the display. Press Confirm Prewash
button. Press Start / Pause button to start the If the Prewash additional function is selected,
programme. Prewash symbol appears on the display
indicating that the Prewash step has started.
Starting the programme Main Wash
Press Start / Pause button to start the Main Wash symbol indicating that the Main
programme. Start symbol showing the startup Wash step has started appears on the display.
of the programme will turn on. Loading door is Rinse
locked and Door Open symbol disappears. The Rinse symbol indicating that the rinsing step
symbol of the step from which the programme has started appears on the display.
has started appears on the display (Prewash, Softener
Main Wash, Rinse, Softener and Spin). Softener symbol indicating that the softener
Child Lock step has started appears on the display.
Use Child Lock function to prevent children Spin
from tampering with the machine. Thus you can Spin symbol appears at the beginning of the
avoid any changes in a running programme. final spin step and remains lit during Spin and
Child Lock is not deactivated after power
C failures Pump programmes.
or when the machine is unplugged. • If the machine does not pass to the
You can activate the Child Lock manually or, spinning step, Rinse Hold function might
from the Settings, automatically. be active or the automatic unbalanced load
To activate manually, press and hold Additional detection system might be activated due to
Function and Confirm buttons. the unbalanced distribution of the laundry
17 - ENin the machine.
Changing the selections after End
programme has started
Switching the machine to pause mode
Press Start / Pause button to switch the
machine to pause mode. Pause symbol
indicating that the machine has switched to Auto switch off
pause mode lights up and the Start symbol If no button is pressed within 15 minutes after
showing that the programme has started and is the end of the programme, machine will turn off
still going on flashes. automatically to save energy. Just press On /
Changing additional function, speed and Off button to switch on the machine.
temperature settings Machine Settings
Depending on the step the programme has You can use the Settings menu to change
reached, you can cancel or activate the Language, Brightness, Contrast, Light,
additional functions; see, "Additional function Favourite and Child Lock settings or to Restore
selection". settings.
You can also change the speed and To enter in the Settings menu:
temperature settings; see, "Spin speed Press On / Off button to switch on the machine.
selection" and "Temperature selection" Press and hold the Soiling Level and Additional
Adding or taking out laundry Function buttons for 3 seconds. "Settings...X"
Press Start / Pause button to switch the appears on the display. "X" shows the
machine to pause mode. The programme number of seconds the button has to be kept
follow-up symbol of the relevant step during pressed. Settings menu will open at the end
which the machine was switched into the of the countdown. Using the Left and Right
pause mode will flash. Wait until the Loading direction buttons (< - >), go to the main menu
Door can be opened. Open the Loading Door you desire (Language, Brightness, Contrast,
and add or take out the laundry. Close the Light, Favourite, Child lock, Restore Settings
Loading Door. Make changes in additional and Return to main page) and press Confirm.
function, temperature and speed settings if Submenus of the selected main menu will be
necessary. Start the machine by pressing the displayed. Using the Left and Right direction
Start / Pause button. arrows (< - >), navigate to the desired submenu
Changing the programme and press Confirm. Options in the relevant
Press Start / Pause button to switch the submenu will be displayed. Make the desired
machine to pause mode in order to change changes in the options and press "Confirm"
a running programme for whatsoever reason. button again to save the new setting. Display
Select the new programme and will switch to the next option in the upper menu.
Press Start / Pause button again. Programme To exit Settings menu, select "Return to main
symbols disappear. Water in the machine, if page" and press Confirm button.
any, is drained and the new programme starts C exitYou can also use the Programme button to
from the beginning. the submenu.
Once the programme is changed, new
C detergent Temperature, Spin Speed, Start / Pause,
C Soiling
must be put in. Level and Additional Function
Canceling the programme buttons are not functional in the settings
Press On / Off button to cancel the programme. menu. Pressing these buttons will not
Machine turns off. When you turn the machine produce any results.
on again, programme will have been cancelled. Language
By making your selections again, you can start Select the appropriate language for you in this
a new programme or unload the machine. menu.
If the Loading Door symbol is not lit after Brightness
C canceling the program, it means that Set the screen brightness to a value between 1
the water level is high. Drain the water to 5 as you wish.
by running either the Pump or Spin Contrast
programme. Set the contrast to a value between 1 to 5 as
End of programme you wish.
Light
Once the programme is over, End symbol There are two options in the Light menu:
appears in the programme indicator. “End” "Eco" and "Normal". When "Eco" mode is
appears on the display. Additional function, selected, machine automatically drops the
spin speed and temperature data that was screen brightness after a while to save energy.
selected at the beginning of the programme is If "Normal" mode is selected, there will be no
not displayed.
18 - ENchange in the screen brightness.
Favourite
You can make 4 different selections as favourite
1
programmes. After you made your selection 88 c
o
and pressed Confirm, selection becomes active. 1888 18:88
Favourite:
- Auto (smarTwash)
- Last (Previously run programme)
- Most (programme that was run most frequently
amongst the recent 10 programmes)
- Fast (Mini14)
These selections will be activated after the
C machine 2 l a ng ua g e
is switched off and on by pressing
On / Off button.
Restore settings
You can cancel all the settings you have made so
far and return the machine back to the defaults
in the factory settings. Press and hold the Soiling
Level and Additional Function buttons for 3
3 l a ng ua g e
seconds to enter the Settings menu. Using the
Left and Right direction arrows (< - >), scroll to
the "Restore Settings?". Once you press Confirm
button, all current settings of the machine will be
canceled and factory settings will be restored.
Following settings will be active once the machine
is returned to factory settings: 4 l a ng ua g e E n g l i s h
Language = English
Brightness = 5
Contrast = 3
Light = Normal
Favourite = Last
Child lock = Manual
To select the desired language from “Restore 5 Engl i s h
Settings”:
1. Press and hold “soiling level” and “additional
function” buttons for 3 seconds to enter the
Settings menu. “Settings 3 2 1” will count
down on the display.
2. At the end of 3 seconds, “Language” will
appear on the display.
3. Press Confirm button. 6 l a ng ua g e E N G L I S H
4. Language will be displayed.
5. Find English by direction buttons.
6. Language will be displayed.
7. Press Confirm button. In this way, the
language has been set as Turkish. The next
menu title will appear on the display.
8. Press “programme” button to exit the settings
menu. 7 ENGL I S H
8
19 - ENSoiling level and temperature setting that appear on the display
Programme
Bedding x 50°C/60°C 30°C/40°C cold
Mini x 70°C/80°C/90°C 40°C/50°C/60°C 30°C/cold
Wool x x 30°C/40°C cold
Hand Wash x x 30°C cold
Dark wash x 30°C/40°C cold x
Hygiene 70°C/80°C/90°C 40°C/50°C/60°C 30°C x
Sportswear x 30°C/40°C cold x
Shirts 50°C/60°C 30°C/40°C cold x
Curtain x 30°C/40°C cold x
Mini 14 x x x 30°C/cold
Lingerie x x 30°C cold
Night mode x 30°C/40°C cold x
Freshen Up (Refresh) x x x x
Jeans x 30°C/40°C cold x
20 - EN5 Maintenance and cleaning Draining remaining water and
Service life of the product extends and frequently cleaning the pump filter
faced problems decrease if cleaned at regular The filter system in your machine prevents solid
intervals. items such as buttons, coins and fabric fibers
Cleaning the detergent drawer clogging the pump impeller during discharge
Clean the detergent drawer at regular intervals of washing water. Thus, the water will be
(every 4-5 washing cycles) as shown below discharged without any problem and the service
in order to prevent accumulation of powder life of the pump will extend.
detergent in time. If the machine fails to drain water, the pump filter
is clogged. Filter must be cleaned whenever it
is clogged or in every 3 months. Water must be
drained off first to clean the pump filter.
In addition, prior to transporting the machine
(eg., when moving to another house) and in case
of freezing of the water, water may have to be
drained completely.
A may Foreign substances left in the pump filter
damage your machine or may cause
Press the dotted point on the siphon in the noise problem.
softener compartment and pull towards you until In order to clean the dirty filter and discharge the
the compartment is removed from the machine. water:
If more than normal amount of water and Unplug the machine to cut off the supply power.
C softener Temperature of the water inside the machine
mixture starts to gather in the A may rise up to 90 ºC. To avoid burning risk,
softener compartment, the siphon must be
cleaned. filter must be cleaned after the water in the
Wash the detergent drawer and the siphon with machine cools down.
plenty of lukewarm water in a washbasin. Wear Open the filter cap.
protective gloves or use an appropriate brush to If the filter cap is composed of two pieces,
avoid touching of the residues in the drawer with press the tab on the filter cap downwards
your skin when cleaning. Insert the drawer back and pull the piece out towards yourself.
into its place after cleaning and make sure that it
is seated well.
Cleaning the water intake filters
There is a filter at the end of each water intake
valve at the rear of the machine and also at
the end of each water intake hose where they
are connected to the tap. These filters prevent If the filter cap is one piece, pull the cap from
foreign substances and dirt in the water to enter both sides at the top to open.
the washing machine. Filters should be cleaned
as they do get dirty.
C You can remove the filter cover by slightly
pushing downwards with a thin plastic
tipped tool, through the gap above the filter
cover. Do not use metal tipped tools to
remove the cover.
Close the taps. Remove the nuts of the water Some of our products have emergency draining
intake hoses to access the filters on the water hose and some does not have. Follow the steps
intake valves. Clean them with an appropriate below to discharge the water.
brush. If the filters are too dirty, take them out Discharging the water when the product has an
by means of pliers and clean them. Take out the emergency draining hose:
filters on the flat ends of the water intake hoses
together with the gaskets and clean thoroughly
under running water. Replace the gaskets and
filters carefully in their places and tighten the hose
nuts by hand.
21 - ENPuoi anche leggere
